SALVAGING JUNK

I love, love, love hand-me downs especially when it comes to furniture.  Something about an old chair, the style, the history, the POTENTIAL.  Mixing and matching antiques with new pieces always makes for a great pair as well as some extra room in your spending budget. I have found that salvaging old furniture is definitely a trend one of the most famous stores in Dallas is Again and Again located off of Henderson. 

Image from Again and Again gallery

So, lets try and salvage some old furniture.  The things you will need include, a fabric of your liking, spray paint, staple gun, hot glue gun, a fabric border, fine sand paper, screw driver, Phillips head and a go-getter attitude. I have seen chairs from elegant (above) to trendy (below)



Image from Blue Artichoke Interiors



1) You will need to remove the screws holding the cushion to the chair.   You can either remove the fabric and use this as your measurement or you can just replace the fabric by laying it over the existing design.  Either way, remove the cushion. 

2)  If the wood needs a little spiffing up, you can lightly sand off any old finishes and place the chair on some plastic in your garage and spray paint the wood, I prefer an off white or a funky color. let the wood set to dry for a couple of hours and touch back over if you need to but let this set for about half a day.

IN THE MEANTIME....

3) remove the seat from the chair and with a screwdriver remove the staples or tracks holding the fabric to the seat board.

4) Cut some sheets of battling to fit the wooden seat (depending on how soft you would like the seat).

5)  Cut the fabric 3 to 4 inches larger then the seat to fit over the battling, than place your cushion on the inside of the fabric and begin wrapping it like a present.  Staple in the middle of one edge, as well as the opposite side by pulling the fabric.  Continue stapling all the way around

6) Once the wood is dry and the fabric is firmly attached to the seat, insert the piece back in the opening and replace the screws that you removed earlier.

and Marvelous!

Image from Ette Studios

Thanks,

  Suzie